betti additive thickness
Measure wall thickness and find thin walls.
additive module Granted on request: see access and licensing.
Usage
betti additive thickness [flags] inExamples
betti additive thickness -min 0.8 -thin thin.obj part.stl
betti additive thickness -map thickness.vtu part.stlFlags
| Flag | Takes | Default | Meaning |
|---|---|---|---|
| -map | text | none | write the part with each face's thickness to this file (.vtu, .msh and .ply keep it) |
| -min | length or number | none | the thinnest wall allowed, such as 0.4 or 1%: report the faces thinner |
| -sdf | switch | off | an alternative measure of thickness, averaged over several directions and smoothed |
| -thin | text | none | with -min: write the thin faces to this file |
Output flags
| Flag | Takes | Default | Meaning |
|---|---|---|---|
| -json | switch | off | print the result as JSON |
| -q | switch | off | print nothing but errors |
| -v | switch | off | also show the stages of each step, and their times |
This page is generated from betti help additive thickness. Lengths are absolute, or a percentage of the part's bounding-box diagonal, as in -size 1%.