betti additive place
Turn a part to print with the least support, and set it on the bed.
additive module Granted on request: see access and licensing.
Usage
betti additive place [flags] in outExamples
betti additive place part.stl ready.3mf
betti additive place -up +x part.stl ready.3mfFlags
| Flag | Takes | Default | Meaning |
|---|---|---|---|
| -overhang | number | 45 | how far from vertical, in degrees, an underside may lean and print without support |
| -up | length or number | none | print with this direction up instead of the best: +x, -z, or x,y,z |
Output flags
| Flag | Takes | Default | Meaning |
|---|---|---|---|
| -json | switch | off | print the result as JSON |
| -q | switch | off | print nothing but errors |
| -v | switch | off | also show the stages of each step, and their times |
This page is generated from betti help additive place. Lengths are absolute, or a percentage of the part's bounding-box diagonal, as in -size 1%.